KLINGER Sealex 膨體四氟墊片

Fume ducts  煙氣管道

    Concrete lids  混凝土蓋子

    Glass joints  玻璃接頭

    Heat exchangers  換熱器

    Fiberglass reinforced plastic vessels 玻璃纖維增?6?7?6?7強塑料容器

    Pump or compressor housing flanges  泵或壓縮機殼體法蘭

    Steam vessel flanges  蒸汽容器法蘭

    Ceramic joints  陶瓷接頭

    Water systems  水系統

    Valves and piping  閥門和管道

KLINGERSealex® joint sealant, specially processed, 100% pure PTFE on a roll, provides soft, highly compressible gasketing for longer life and trouble-free sealing. Its form-in-place versatility also cuts maintenance and storage costs. The high compressibility of Sealex® enables it to effectively fill flange imperfections for a tight, leak-free seal. Under pressure, it provides a very wide, thin ribbon-like joint sealant. Unlike conventional PTFE which is prone to cold flow, Sealex® has good creep resistance and bolt torque retention properties

KLINGERSealex®接縫密封膠，經過特殊加工，100％純PTFE在輥上，提供柔軟，高度可壓縮的襯墊，延長使用壽命，*密封。其現場多功能性還可降低維護和存儲成本。 Sealex®的高壓縮性使其能夠有效填充法蘭缺陷，實現緊密，無泄漏的密封。在壓力下，它提供了一種非常寬的薄帶狀接縫密封劑。與傳統的易于冷流動的PTFE不同，Sealex®具有良好的抗蠕變性和螺栓扭矩保持性能

KLINGERSealex joint sealant does not support bacterial growth or cause product contamination and is FDA compliant. It has virtually no shelf-life concerns since PTFE is unaffected by normal environmental conditions.

Sealex接縫密封膠不支持細菌生長或導致產品污染，符合FDA標準。它幾乎沒有保質期問題，因為PTFE不受正常環境條件的影響。

Sealex has excellent resistance properties to chemical attack. It is ideal for most chemical services at temperatures to 500°F (260°C) and pressure to 2,000 psi (138 bar). It is also suitable for cryogenic use to -321°F (-196°C).

Sealex具有出色的抗化學侵蝕性。它適用于大多數化學品服務，溫度為500°F（260°C），壓力為2,000 psi（138 bar）。它也適用于-321°F（-196°C）的低溫使用。